Quotations and orders apply to the FME-CWM conditions filed at the Rechtbank in Den Haag on the 16th of April 2010 under no. 29/2010. Outside the Netherlands these are governed by the ORGALIME General Conditions for the supply of mechanical, electrical and electronic products (SI 14) of January 2014. Any other conditions are herewith explicitly rejected by us. Copies will be sent free of charge. Register chamber of Commerce, Meppel no. 04032610.
OIL COOLED ELECTRIC MOTORS
METHOD OF COOLING
COMBIMAC designs and manufactures oil cooled electric motors with two different types of cooling methods. One version provides surface oil cooling and the other version has internal oil cooling.
Surface oil cooled electric motors are provide with a separate cooling jacket. The cooling oil is cooling the outside of the motor stator, whereas the motor internal parts are dry running. To guarantee a sufficient amount of cooling the cooling mantles are manufactured from bronze alloy or aluminium.
Unlike surface cooled electric motors, the cooling oil is running through the motor, providing an optimum cooling. The cooling oil at the same time is used to lubricate the motor bearings, often leading to a simplified electric motor design.
Another option for an internally cooled electric motor is to have internally oil cooled motors, providing the use of a can, the so called canned motors. This method is used to prevent the stator winding getting into contact with a possibly aggressive cooling medium to avoid any risk of deterioration of the windings.
External oil cooling
Internal oil cooling
Special electric motors and fans
1919 - 2019